Combination Machine - 5 Operations

Combination Machine SCM Minimax LAB 300p / CU 300c

The combination machine is a multifunctional universal woodworking machine that combines 5 different operations for processing solid wood and wood composites.

Sliding table saw:

is a table circular saw with a sliding carriage, used for cutting solid wood and wood composites.

• Saw blade diameter: up to 315 mm
• Scoring unit
• Blade tilt adjustment: 0°–45°
• Max. cutting height: 90 mm (0°) and 63 mm (45°)
• Max. cutting width at the rip fence: 800 mm
• Max. cross fence length LAB 300p: 1600 mm
• Carriage length LAB 300p: 1600 mm
• Carriage length CU 300c: 2310 mm
• Max. cross fence length CU 300c: 2600 mm

Spindle moulder:

you can groove, slot, chamfer edges, profile, and mill joints and tenons.

• Usable spindle height: 100 mm
• Max. tool diameter for profiling: 210 mm
• Spindle speeds: 3500 / 7000 / 10000 rpm
• Moulder guard with wooden fences
• Copying guard

Combined planer:

performs two operations – surface planing and thicknessing. The surface planer is used to flatten uneven pieces, while the thickness planer processes one-sided flattened pieces to achieve parallel surfaces and the desired thickness.

• Planer width: 300 mm
• Length of planing tables: 1510 mm / 1300 mm
• Fence tilt: 0°–45°
• Min./max. thicknessing height: 3–230 mm
• Minimum workpiece length: 300 mm
• Feed speed: 7 m/min

Horizontal drill (only on CU 300c):

is used for drilling holes and milling open or blind slots.

• Table size: 470 × 320 mm
• Drill chuck capacity: 16 mm
• Longitudinal travel: 160 mm
• Cross travel: 120 mm
• Vertical travel: 110 mm

Suitable materials:

All types of wood and wood composites – including panel materials such as plywood, particleboard, and fiberboard, as well as materials with wood-like properties.

Usage time (including preparation and cleaning):

• Duration of one time slot is 1 hour
• Station usage possible: 1–6 hours/day
• Reservation is possible at least 1 hour and no more than 7 days before the start of the time slot
• Cancellation of the reservation is possible up to 2 hours before the time slot
• With timely cancellation, the same single-entry ticket can be used again

To make a reservation, I need:

Completed training for the “Combination Machine”: Part 1 – circular saw or Part 2 – planer, spindle moulder, horizontal drill + user package:

• single-entry ticket or
• monthly package or
• annual package

The order of completing the trainings is not specified, and it is not mandatory to complete both trainings. If you complete only one of the two trainings, you may already reserve this workstation, but you may only use the functions for which you have completed the training.